DMAEE/2-[2-(Dimethylamino) Ethoxy] Ethanol

Overview:
Chinese name: dimethylaminoethoxyethanol, N,N-dimethyl ethylaminoethylene glycol
Alias: Dimethylaminoethoxyethanol, 1704-62-7, N-dimethylethylaminoethylene glycol, low odor foaming catalyst DMAEE, low foaming catalyst DMAEE, low odor catalyst DMAEE, DMAEE, Dabco DMAEE, Toyocat RX3, Jeffcat ZR-70, Lupragen N107, PC CAT NP70, Foaming Catalyst DMAEE, Polyurethane Foaming Catalyst DMAEE, Odorless Catalyst, Odorless Amine Catalyst, Specialty Catalysts
English name: dimethyaminoethoxyethanol, dimethyl2-(2-aminoethoxy)ethanol, 2-(2-dimethylaminoethoxy)-ethynol
Molecular Formula: C6H15NO2
Relative molecular weight: 133.2
CAS No.: 1704-62-7
English Name 2-[2-(Dimethylamino)ethoxy]ethanol
Product name 2-[2-(Dimethylamino)ethoxy]ethanol; N,N-Dimethylaminoethyl ethylene glycol
Molecular structure See figure
Molecular formula C6H15NO2
Molecular weight 133.19
CAS 1704-62-7
EINECS 216-940-1
Density 0.954
Boiling point 95 oC (15 mmHg)
Refractive index 1.442
Flash Point 93 oC

Physical and Chemical Properties:
Dimethylaminoethoxyethanol is colorless or light yellow liquid at room temperature, soluble in water;
Viscosity(25℃,mPa.s):4
Density (25℃,g/cm3): 0.84
Water solubility: soluble in water
Flash point (PMCC,℃): 88
Hydroxyl value (mgKOH/g): 298

Dimethylaminoethoxyethanol Dimethylaminoethoxyethanol CAS 1704-62-7 N,N-Dimethylethylaminoethylene glycol Low odor foaming catalyst DMAEE Low foaming catalyst DMAEE Low odor catalyst DMAEE DMAEE Dabco DMAEE Toyocat RX3 Jeffcat ZR-70 Lupragen N107 PC CAT NP70 Foaming Catalyst Polyurethane Foaming Catalysts

Physical and Chemical Properties:
Colorless or light yellow liquid, relative density (20℃) 0.96, viscosity 5mPa.s, flash point 86℃(PMCC), 93℃(PTT), vapor pressure (21℃) <6.7Pa, boiling point 201~205℃, freezing point <-40℃, soluble in water, pH about 11.0.

Characteristics and Uses:
Low-odor reactive catalyst for rigid foam, also used in molded soft foam and polyether polyurethane soft block foam.

Applications:
Dimethylaminoethoxyethanol is a non-emitting amine catalyst primarily used in low density, water-blown, open-cell spray polyurethane foams (SPF); Dimethylaminoethoxyethanol can be used alone as a primary catalyst, or as a co-catalyst to reduce the use of a class of BDMAEE-based foaming catalysts.

Storage and Transportation:
Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. Shower and change clothes after work. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.