Overview:
Product name: Dabco NE1060 catalyst
Alias: Dabco NE1060 Catalyst, Dabco NE1060, Foam Catalyst Dabco NE1060, Non-emitting Polyurethane Catalysts
Product Description: Dabco NE1060 Catalyst for Flexible Molded Polyurethane Foams
Description.
Dabco NE1060 catalyst is a new, second generation, non-emission (NE) gel catalyst for diphenylmethylene diisocyanate (MDI) and toluene diisocyanate (TDI) polyurethane expanded flexible molded foams Dabco NE1060 catalyst maintains the foam properties while forming a Dabco NE1060 catalysts maintain foam properties while forming a strong chemical bond with the polyurethane foam matrix. Used in automotive manufacturing, this product eliminates the odor and VOC emissions associated with polyurethane catalysts that cause windshield fogging and beading and staining of polyethylene plastics.
Typical Physical Properties.
Appearance Colorless transparent liquid
Specific gravity 1.06
Viscosity @25℃ mPa.s 1200
Water solubility @25℃ completely dissolved
Flash point, ℃ 168
Characteristics
1、Non emitting polyurethane catalyst
2、Non emission of volatile organic compounds
3、No staining of polyethylene plastic
4、Does not let windshield fog and water droplets appear
-
Stabilized masterbatch
6、Reduce odor
7、Control the stability between batches
Recommendations for Use.
Dabco NE1060 catalyst is recommended for use in TDI or TDI/MDI polyurethane high resilient (HR) foams, as well as TDI/MDI-based or MDI-based polyurethane cold cure molded foams, and polyurethane liner foam systems. This non-volatile catalyst is compatible with other commonly used polyurethane catalysts and additives and is highly miscible with polyols and polyol-water mixtures.
Dabco NE1060 catalyst is recommended for use at levels of 0.50 to 1.50 pphp in MDI systems and 0.40 to 0.70 pphp in TDI systems.
Shelf Life.
Keep unopened for two years
Storage and Transportation:
Should be kept sealed and stored in a dry, cool, ventilated warehouse
Packaging:
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.
Company?Name: |
Newtop?Chemical?Materials?(Shanghai)?Co.,?Ltd. |
Sales?Manager: |
Hunter |
E_Mail: |
?sales@newtopchem.com |
Telephone: |
86-152 2121 6908 |
Fax: |
86-021-5657?7830 |
Address: |
Rm.?1104,?No.?258,?Songxing?West?Road,
|
Website: |
www.hbysgp.com? |
Overview:
Product name: Dabco NE1060 catalyst
Alias: Dabco NE1060 Catalyst, Dabco NE1060, Foam Catalyst Dabco NE1060, Non-emitting Polyurethane Catalysts
Product Description: Dabco NE1060 Catalyst for Flexible Molded Polyurethane Foams
Description.
Dabco NE1060 catalyst is a new, second generation, non-emission (NE) gel catalyst for diphenylmethylene diisocyanate (MDI) and toluene diisocyanate (TDI) polyurethane expanded flexible molded foams Dabco NE1060 catalyst maintains the foam properties while forming a Dabco NE1060 catalysts maintain foam properties while forming a strong chemical bond with the polyurethane foam matrix. Used in automotive manufacturing, this product eliminates the odor and VOC emissions associated with polyurethane catalysts that cause windshield fogging and beading and staining of polyethylene plastics.
Typical Physical Properties.
Appearance Colorless transparent liquid
Specific gravity 1.06
Viscosity @25℃ mPa.s 1200
Water solubility @25℃ completely dissolved
Flash point, ℃ 168
Characteristics
1、Non emitting polyurethane catalyst
2、Non emission of volatile organic compounds
3、No staining of polyethylene plastic
4、Does not let windshield fog and water droplets appear
-
Stabilized masterbatch
6、Reduce odor
7、Control the stability between batches
Recommendations for Use.
Dabco NE1060 catalyst is recommended for use in TDI or TDI/MDI polyurethane high resilient (HR) foams, as well as TDI/MDI-based or MDI-based polyurethane cold cure molded foams, and polyurethane liner foam systems. This non-volatile catalyst is compatible with other commonly used polyurethane catalysts and additives and is highly miscible with polyols and polyol-water mixtures.
Dabco NE1060 catalyst is recommended for use at levels of 0.50 to 1.50 pphp in MDI systems and 0.40 to 0.70 pphp in TDI systems.
Shelf Life.
Keep unopened for two years
Storage and Transportation:
Should be kept sealed and stored in a dry, cool, ventilated warehouse
Packaging:
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.
Company?Name: |
Newtop?Chemical?Materials?(Shanghai)?Co.,?Ltd. |
Sales?Manager: |
Hunter |
E_Mail: |
?sales@newtopchem.com |
Telephone: |
86-152 2121 6908 |
Fax: |
86-021-5657?7830 |
Address: |
Rm.?1104,?No.?258,?Songxing?West?Road,
|
Website: |
www.hbysgp.com? |