Overview:

Product name: Strong Gel Catalyst Dabco T120

Alias: Dabco T120,1185-81-5,Bis(dodecylthio)dibutyltin,Strong Gel Catalyst,Strong Gel Catalyst Dabco T120,Microporous Elastomer Catalyst Dabco T120,Hard Foam Catalyst Dabco T120

Product Description: Dabco T120 is CAS: 1185-81-5 Molecular Formula: C32H68S2Sn Molecular Weight: 635.72 EINECS No.: 214-688-7 Related Categories: Metal Organic Mol File: 1185-81-5.mol.

Brief introduction

Bis(dodecylthio)dibutyltin

CAS: 1185-81-5

Molecular Formula: C32H68S2Sn

Molecular weight:635.72

EINECS No.:214-688-7

Related category:Metal-organic compounds

Mol file:1185-81-5.mol

Chinese name:Dabco T120

Boiling Point:160°C 10mm

Density:1,04 g/cm3

Refractive index: 1.4992

Physical and Chemical Properties

Flash point: >204°C

Viscosity (25°C) about 20 mPa.s

Vapor pressure 1.3kPa

This catalyst belongs to dibutyltinmercaptide category.

Oily liquid, insoluble in water.

Thermally active, the catalytic reaction starts slowly and then improves quickly.

Application

Strong gel catalyst with good hydrolytic stability, higher catalytic activity than DBTDL, good storage stability, used in microcellular elastomers and hard foam.

Shelf life.

Keep unopened, two years

Storage and transportation:

Should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Overview:

Name: Polyurethane Thermal Delay Catalyst

Alias：Thermosensitive metal catalyst, polyurethane metal catalyst, metal catalyst, thermosensitive metal catalyst, metal delay catalyst, strong gel catalyst, light foam catalyst, polyurethane thermosensitive delay catalyst

NT CATE-129 is a strong gel catalyst with strong selectivity to isocyanate-hydroxyl group, good delay effect in this series of catalysts, and excellent hydrolysis resistance, the catalytic activity is very low when the material temperature is lower than 40 ℃, the catalytic activity starts to appear when the material temperature reaches 40 ℃, and the catalytic activity increases rapidly when the material temperature reaches 50 ℃, and the catalytic activity is much higher than the marketed catalytic activity when the material temperature reaches 110 ℃. When the material temperature reaches 50℃, its catalytic activity increases rapidly, and the material temperature reaches 110℃, and its catalytic activity is stronger than that of common organotin and organobismuth in the market;

Thermal metal catalyst Polyurethane metal catalyst Metal catalyst Thermal metal catalyst Metal delayed catalyst Strong gel catalyst Light foam catalyst Polyurethane thermal delayed catalyst

Uses:

NT CATE-129 can be widely used in the field of polyurethane CASE for the production of skate wheels, one and two-component sealants, coatings, adhesives, etc. It is used for aliphatic isocyanates and will not yellow the products.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse.

Packing:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.